No of Tests:
1. Battery Test (Good/Recharge/Replace, Volt, CCA, mOhm, Life%)
2. Grounding Test (Earthing)
3. Starter Test
4. Alternator Test (at 3000 & 2000 rpm)
Test Report: Detachable Optional Printer + PC Link(via USB cable)
Packaging: Blow mold carry case
Language: Standard supply with 4 languages per Analyser
Available Language: English, German, Spanish, French, Italian, Polish, Romanian, Dutch, Swedish & Finnish (Additional charges are applicable for Max. 10 languages)
This Analyser uses our patented battery internal resistance technology to test all 12V Starting Battery: either Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell.
Testing can be done on the battery whether it is on or off the vehicle while engine had turn OFF.
A selection ratings "CCA, SAE, EN, IEC, DIN, CA , JIS# and Unknown" from the menu for testing basing on the battery specifications listed on its label.
BESA 12 conducts 4 Tests on Battery and vehicle electrical system:
1. Battery Test:
It analyses the battery condition using microprocessor controlled testing methods without the need of fully charging it before test. For less than 7 seconds, the results of the testing will be displayed on the LCD screen as below:
2. Grounding Test:
It analyses the condition of the electrical return circuit contacts resistance which were connected to the engine or chassis body from the battery terminal with results and recommendations displayed after test.
3. Starter Test:
It checks the cranking effectiveness of the battery to predict when the battery will fail to crank a vehicle basing on voltage profiles with results and recommendations display.
4. Alternator Test: It tests the alternator charging condition during load at 2,000 RPM and without load at 3,000 RPM with results and recommendations display after each test.
1.This Analyser is maintenance free and does not require internal batteries. It powers up when connected to the battery posts during testing.
2. Test Results can be printed directly by selecting Printer (mobile) or PC Link
a. Printer (Optional Item)
After removing the detachable back cover of the Analyser, insert the mobile printer into the slot.
To print just press key on the Analyser, the mobile printer will start to print.
b. PC Link
BESA 12 is designed to link with PC for data storage and printout through normal printer by installing the driver and the software provided. You can key in the test date, customer name, car number or battery reference number, battery model and capacity to the report. You can add-on your Company name, address and contact number to the report as well.
3. Help Key
This help key displays information about each function when selected, as well as explaining the various test results.
4. Multi languages - Various languages are available in a set of 4 languages per unit
It powers up when connected to the battery posts during testing and does not require internal batteries